Maintenance - Genie GS-2668 RT Operator's Manual

Operator's Manual

Maintenance

Observe and Obey:
Only routine maintenance items specified in this
manual shall be performed by the operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Maintenance Symbols Legend
The following symbols have been
used in this manual to help
communicate the intent of the
instructions. When one or more of
the symbols appear at the
beginning of a maintenance
procedure, it conveys the meaning
below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
Indicates that a cold engine is required
before performing this procedure.
14
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
1 Check the oil level dipstick.
Kubota DF-750 Engine
Oil capacity (including filter)
Oil viscosity requirements
Use oils meeting API classification SF (labeled SF/CC
or SF/CD) for improved wear protection. Units ship with
10W-40 SG/CC
Kubota D-905 Engine
Oil capacity (including filter)
Oil viscosity requirements
Engine oil should have properties of API classification
CC/SE, CD/SE, CC/SF or CD/SF grades. Units ship
with 10W-40 SG/CC.
Genie GS-2668 RT & Genie GS-3268 RT
First Edition · Tenth Printing
Check the oil level with the
engine off.
Result: The oil level should be at the
on the dipstick. Add oil as needed.
mark
FULL
3.44 quarts
3.25 liters
5.4 quarts
5.1 liters
Part No. 48735