True SPECTRUM ELLIPTICAL XS1000 Owner's Manual page 22

CHAPTER 2: ASSEMBLY GUIDE
ASSEMBLY STEPS:
STEP 14 Attach Rear Console Plastic:
a) Attach the Rear Console Cover using one M5 08.x12mm bolt.
Hardware Required:
1 M5 0.8 x 12 mm bolts
*DO NOT use an impact drill when
assembling plastic components.
STEP 15 Floor Levelers:
a) If necessary, adjust 3 levelers on
bottom of machine to accommodate
uneven flooring.
STEP 16 Final Unit Connections:
a) Power Cable
b) Coax Cable (optional)
c) Network Cable (optional)
d) Additional unit power (optional)
*Up to 3 Spectrum (TS1000) Ellipticals
can be chained together and powered
via the additional unit power port.
A B C D
Truefitness.com / 800.426.6570 / 636.272.7100
22 of 36