PRE-ASSEMBLY CHECK LIST:
Tools Required (not included):
•
Phillips screwdriver
•
M6 Hex Key
•
M8 Hex Key
•
M10 Hex Key
•
17mm wrench
CAUTION:
•
It is recommended that two people unpack and assemble elliptical.
•
Remove bands from packaging and pull top from pallet.
•
Remove all parts from packaging. Leave machine on pallet.
•
For each step use hardware in the corresponding bag.
WARNING:
DO NOT use an impact drill when assembling plastic components!
Parts Identification:
Use this page to identify the parts used in each step.
Exercise Arms
Steps 6 & 7
Heart Rate Handlebars
Step 5
Pedestal
Step 1
Footskates & Pedal Tubes
Steps 11, 12, & 13
Step Up Tube
Step 2
CHAPTER 2: ASSEMBLY GUIDE
Truefitness.com / 800.426.6570 / 636.272.7100
Console
Step 14
Console Mast
Step 4
Draw Bars
Step 10
Chin Bar
Steps 8 & 9
Base
Step 1
13 of 36