True SPECTRUM ELLIPTICAL XS1000 Owner's Manual page 15

ASSEMBLY STEPS:
STEP 1 Fold Up and Install Pedestal:
a) Remove the container lid and top layer of parts
and packaging.
b) Remove all loose parts and packaging materials.
c) Leave the machine base on the shipping container
until Step 3.
d) Lift the Pedestal into an upright position.
e) Secure each Pedestal to the Base
using 6 M10 1.5 x 20mm bolts and
an 8mm allen wrench.
Hardware Required:
12 M10 1.5 x 20mm Bolts
STEP 2 Install Step Up Tube and Cover:
a) Attach the step tube to the rear of
the machine using the
2 M10 1.5 x 75mm bolts and
a 13mm socket.
b) Attach the plastic step using the
4 M5 0.8 x 12mm screws.
Hardware Required :
4 M5 0.8 x 25 mm Bolts
2 M8 1.25 x 70mm Bolts
CHAPTER 2: ASSEMBLY GUIDE
M10 1.25 x 70mm bolts
Truefitness.com / 800.426.6570 / 636.272.7100
M5 0.8 x 25 bolts
15 of 36