CHAPTER 2: ASSEMBLY GUIDE
ASSEMBLY STEPS:
STEP 5 Install Heart Rate Handle Bars:
a) Connect Cardio Arm Heart Rate Cable.
b) CAREFULLY slide the handle bar onto
Pedestal and tuck the Heart Rate Cable into
the metal tube. Make sure to not pinch the
heart rate wires.
c) Use 3 M6 1.0 x 10mm bolts, 3 flat
washers, and 3 spacers on each side
to tighten the handle bars onto the
Pedestal.
Hardware Required:
STEP 6 Install Upper Exercise Arms:
a) Install each upper arm with 4 M8 1.25 x
20mm bolts using a 6mm hex key.
Hardware Required:
8 Tapered M8 x 16 mm bolts
Truefitness.com / 800.426.6570 / 636.272.7100
17 of 36