True SPECTRUM ELLIPTICAL XS1000 Owner's Manual page 16

CHAPTER 2: ASSEMBLY GUIDE
ASSEMBLY STEPS:
STEP 3 Remove Unit from Pallet:
a) Using the Step up tube, lift the unit at the rear.
b) Carefully walk the unit forward to remove it from
the pallet.
STEP 4 Route Cable and Install Console Mast:
a) Slide the USB data cable through the opening in the
Console Mast toward the front of the machine (in the
direction of the arrow shown to the right).
b) Secure the console mast to the unit
using 4 M8 1.25 x 16mm bolts and a
6mm allen wrench.
Hardware Required:
4 M8 1.25x16mm Bolts
Truefitness.com / 800.426.6570 / 636.272.7100
16 of 36