Id Setting; Self Id - Furuno FM-8800D Service Manual

4.2 ID Setting

4.2.1 SELF ID

When your own ID (MMSI) is not registered FM-8800S/D becomes the only operable
VHF function.
1. DSC communication is not available. Even if you press "CALL" key, "NO
MMSI" comes on, switch to DSC display can not be made, and editing DSC TX
message can not be done.
2. Even if you press [LOG] key, NO MMSI comes on, and DSC logs does not
open.
3. Distress Alert, All Ship Calls, Group Call and Area Call for the DSC cannot be
received.
4. Even if the position data are not inputted, alarm informing the input error of
position data does not go off.
INTL Ver. : Registered screen for MMSI
Russian Ver. : Registered screen for MMSI
NOTE)
In Russsian Ver., when turning on the power with the unregistered MMSI, "This unit CAN'T send
any DSC calls until ship's MMSI is entered. Press any key!" pop-up menu is displayed.
INTL
16
Hi
Rx
AUTO ACK WATCH CH 70
LAT : 35 10' N 10 : 10 UTC
LON : 135 11' E AUTO
INTL
16
Hi
Rx
AUTO ACK AUTO CH: ENA
LAT : 34 45.1111' N 12:12
LON : 135 45.1111' E UTC
MMSI 432456789 AUTO
INTL
16
Hi
Rx
DSC NOT USABLE
LAT : 35 10' N
LON : 135 11' E
INTL Ver. : Non-registered screen for MMSI
INTL
Hi
Rx
DSC NOT USABLE
LAT : 34 45.1111' N
LON : 135 45.1111' E
MMSI ---------------
Russian Ver. : Non-registered screen for MMSI
4-3
4.2 ID Setting
10 : 10 UTC
AUTO
16
12:12
UTC
AUTO