Regulation; Vdr Output Level - Furuno FM-8800D Service Manual

4.4.9 REGULATION

This function is currently inoperative. (2005/5)
This is a setup to reserve in Russian Type Approval.
- INTL Ver. : Set to INTL.
- Russian Ver. : Set to RUSSIAN.

4.4.10 VDR OUTPUT LEVEL

The VDR connection port is connected to #23 and #24 inside the Junction box
(IF-8810). Balance type output is 600 ohm/0 dBm and the adjustable range is –10 dBm
to +10 dBm.
Procedure
1. Select [MENU] -> SYSTEM -> VDR OUTPUT LEVEL and press [ENT] key.
VDR OUTPUT LEVEL
LEVEL (1 – 16)
<■■■■ ＞ 8
2. Set up the output level using either Channel Knob or arrow key and press [ENT] key
to store data.
Output Level
EXT: ENT
Fig. 4.4.1 VDR Output
4.4 System Setting: Option Menu
Factory setting value: 8
(Approximately 0 dBm)
Output data
4-27