Check The Detailed Program Number - Furuno FM-8800D Service Manual

7.2.2 Check the detailed program number

1. Make a jumper between #2 and #15 of [PRINTER] port.
between #25 and #26 of IF-8810. See page 4-1.
2. Press [Menu] key and select "SYSTEM" and then, followed by [ENT] key.
3. Input the password "xxxxxx" to go to the option menu.
4. Select "TEST" from SYSTEM SETUP MENU display and press [ENT] key to go to
TEST MENU.
5. Select "CPU" and press [ENT] key to go to CPU TEST.
6. Select "PROG.VER" and press [ENT] key to bring up the PROGRAM VERSION.
PROGRAM VERSION
FM-8800 : 0550215-02
HS-8800 : 0550216-01
HS-8800 : 0550216-01
HS-8800 : 0550216-01
HS-8800 : 0550216-01
IF-8820 : 0550217-01
Note;
There is no IF-8820 in the Russian Ver.
[PRINTER]
15
2
xxxxxx
" ▼ " mark: You can open all
system setup menus.
- Remote Handset version is displayed by the
lowest ID number of Handset ID.
- Version of the unconnected unit is not
displayed.
7-10
7.2 Updating Procedure
Or, jumper connection