System Setting: Option Menu; Auto 1W; Auto Reverd; Ch70 Board - Furuno FM-8800D Service Manual

4.4 System Setting: Option Menu

To call up the option menu, see page 4-1.

4.4.1 AUTO 1W

In case of ON setup, VHF channel output is automatically reduced to 1W.
VHF to control channel is as follow:
- "LOW POWER" channel which is described on VHF channel list.
- A channel which is set up to LOW POWER by [MENU] -> SYSTEM -> CH
CONFIG.
All channels are Hi Power when setting OFF.
Then, the reduced channel by 1W cannot be set up to Hi power even if [0:HI/LO] key is
pressed.
Procedure
1. Select [MENU] -> SYSTEM -> AUTO 1W and press [ENT] key.
2. "ON/OFF" pop-up window will appear. Then, select ON and press [ENT] key.

4.4.2 AUTO REVERD

In case of ON setup, it goes back to CH16 automatically when Transceiver unit Handset
or Remote Handset are back on Hanger. (ON HOOK)
Procedure
1. Select [MENU] -> SYSTEM -> AUTO REVERD and press [ENT] key.
2. "ON/OFF" pop-up window will appear. Then, select ON and press [ENT] key.

4.4.3 CH70 BOARD

This function is not available.
4.4 System Setting: Option Menu
4-22