Ch Mode; Scan/Dw - Furuno FM-8800D Service Manual

4.4.5 CH MODE

This is to set up ON/OFF for INTL, USA/WX, CANADA, INLND and PRIV mode.
You can switch the mode by pressing [SHIFT] -> [7: INTL/USA]. The mode set up by
CH CONFIG. has to be set to ON in order for it to be available in this mode setting.
USA/WX
PRIV
Procedure
1. Select [MENU] -> SYSTEM -> CH MODE.
2. Bring a cursor onto a mode to setup and press [ENT] key to set up "ON/OFF".

4.4.6 SCAN/DW

This is ON/OFF setting for SCAN and Dual Watch.
Dual Watch
Additional Channel
ex: CH06
1. Receives CH16 and Additional Channel to watch alternately at the above timing.
2. LCD channel indication is changed at the same timing.
3. When receiving CH16 during Dual Watch, it is locked. Dual Watch function resumes
5 seconds after a signal is lost.
4. Even if receiving Additional Channel, it receives alternately at the above-mentioned
timing.
5. Set PTT switch of Handset to ON or press [SHIFT] -> [9: DW] key by turns. Dual
Watch function stops.
MODE
INTL : ON
: OFF
CANADA : OFF
INLND : OFF
: OFF
T=1000 ms
4.4 System Setting: Option Menu
[ENT]
ON/OFF
INLND:
When ATIS ID is registered, ON/OFF
is available.
CH16
T=150 ms
4-24