Furuno FM-8800D Service Manual page 20

6. Distress relay
When the same distress relay message is received more than twice within one hour, the
alarm is not activated.
7. Compose Message
The indication on "Compose Message" window is
changed from "TCmd1" and "TCmd2" to "KAIND",
"COMM MODE" and "COMM MODE".
On the last line, a message is displayed whether
transmitted message is requested ACK or not. "ACK
REQ" message is displayed for Call and Distress alert
and "NO ACK REQ" is displayed for all Call and Group
call. "Polling Call" and "AREA CALL" are deleted from
this window.
8. Transceiver unit and Remote Handset Operation Panel
The indications of "AUTO CH" setting and "DATA/TIME" from RTC are added on the
operational panel.
Position data is displayed in 1/10 000 min.
FM-8800S/D Operation Panel
- AUTO CH: ENB/DIS (Set in [MENU] -> AUTO CH)
The state of AUTO ACK is set to ON and ON-HOOK.
When receiving the INDVIDUAL/ROUTINE call, communication CH is changed
automatically after transmitting AUTO ACK.
When CH is set to "ENA", it changes automatically. And when set to "DIS", it changes
manually.
- Year/Day/Time
Year/Month/Date/Time data using for LOG of Time stamp are displayed.
Data priority is displayed in ZDA > RMC > manual. When it is set by manual, set data in
[MENU] -> RTC.
Remote Handset Operation Panel
3/6