Memory Clear - Furuno FM-8800D Service Manual

8.4 Memory Clear

Execute MMSI CLEAR and ALL CLEAR
- Clear MMSI CLEAR: MMSI
- ALL CLEAR: Erase all registered/stored data. It returns to the default setting.
Procedure
1. Call up the option menu with reference to page 4-1.
Select [MENU] -> SYSTEM -> [ENT] -> and input the password.
2. Select EEROM PROTECTD and input the password(same as step.1). Then, ON/OFF
pop-up window will appear.
3. Select OFF and press [ENT] key. Then, EEROM PROTECTED will switch to
EEROM.
4. Press ENT key and below display will appear.
NO
MMSI CLEAR
ALL
5. Select an item to select and press ENT key.
Carrying out of ALL CLEAR
When you carry out ALL CLEAR, "Int. EEPROM" pop-up window will appear. This
pop-up window disappears when ALL CLEAR is done which takes approximately 5
minutes and clears below Log and setups.
- Communication Log
- SETUP MENU (User Menu)
- SYSTEM SETUP MENU (Option Menu)
CLEAR
CLEAR
8-18
8.4 Memory Clear