Siemens Sinumerik 802D sl Instruction Manual page 36

Interfaces
4.3 PP 72/48 I/O module interfaces
I/O interface
The following devices can be connected to the connectors X111, X222 and X333 (50-pin rib-
bon-cable plug):
S either one machine control panel (MCP) and one terminal strip converter for digital inputs/
digital outputs (see Fig. 4-3)
or
S three terminal strip converters for digital inputs/digital outputs (see Fig. 4-4)
The terminal strip converters are connected to the PP 72/48 I/O module via ribbon cable.
The individual wiring can be performed at the terminal strips according to your particular
application.
Connector pin assignment
Designation:
Type:
Table 4-13
Pin
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
1)
x = 1 for connector X111; x = 2 for connector X222; x = 3 for connector X333
m = 0 for connector X111; m = 3 for connector X222; m = 6 for connector X333
n = 0 for connector X111; n = 2 for connector X222; n = 4 for connector X333
4-34
X111, X222, X333
50-pin ribbon-cable connector
Pin assignment of the connectors X111, X222, X333
Name Description
M Ground (GND)
DI m+0.0 Input bit
DI m+0.2 Input bit
DI m+0.4 Input bit
DI m+0.6 Input bit
DI m+1.0 Input bit
DI m+1.2 Input bit
DI m+1.4 Input bit
DI m+1.6 Input bit
DI m+2.0 Input bit
DI m+2.2 Input bit
DI m+2.4 Input bit
DI m+2.6 Input bit
not –
assigned
not –
assigned
DO n+0.0 Output bit
DO n+0.2 Output bit
DO n+0.4 Output bit
DO n+0.6 Output bit
DO n+1.0 Output bit
Pin Name
2 P24OUT DC 24 V, internal supply
INT
voltage for the inputs
4 DI m+0.1 Input bit
6 DI m+0.3 Input bit
8 DI m+0.5 Input bit
10 DI m+0.7 Input bit
12 DI m+1.1 Input bit
14 DI m+1.3 Input bit
16 DI m+1.5 Input bit
18 DI m+1.7 Input bit
20 DI m+2.1 Input bit
22 DI m+2.3 Input bit
24 DI m+2.5 Input bit
26 DI m+2.7 Input bit
28 not –
assigned
30 not –
assigned
32 DO n+0.1 Output bit
34 DO n+0.3 Output bit
36 DO n+0.5 Output bit
38 DO n+0.7 Output bit
40 DO n+1.1 Output bit
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
Description
6FC5 397-0CP10-1BA0