Siemens Sinumerik 802D sl Instruction Manual page 147

Fig. 10-34 Passing on the control priority to the PC
3. Since our example concerns commissioning, confirm this dialog box for assuming control
Fig. 10-35 Diagnostics view
4. To display, amongst other things, the status lamps for the control word bits, click Display/
Siemens Automation Parts
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
10.2
You can enter an application monitoring. This is the time that may pass between two set-
points until the sign-of-life monitoring of the drive responses (error 1910).
You can use the default monitoring time (e.g. 3000 ms).
priority by choosing OK.
hide diagnostics view.
Table 4-14 lists the most important digital input signals of the control word for sequence
control, which are required to set a motor to motion and which are issued via the control
panel for the control unit (CU320 in 802D).
Operating the control panel in STARTER (with the motor rotating)
You can use the default monitoring time
(e.g. 3000 ms).
To continue with commissioning, choose
OK.
Click
Display/hide diagnostics view.
Status "lamps" for the control word bits.
Creating a Drive Project
10-145