Siemens Sinumerik 802D sl Instruction Manual page 126

Creating a Drive Project
10.1 Creating a drive project OFFLINE
Note
If you deactivate the "Display wizard during start" field, the Project Wizard is not displayed
when you next start STARTER.
You can call up the Project Wizard by choosing Project > New with wizard.
Note
To deactivate the online help for "Getting started", follow the instructions provided in Help.
You can call up the online help at any time by choosing "Help –> Getting started".
STARTER features a detailed online help function.
2. Close the online help and follow the instructions provided by the Project Wizard
STARTER.
3. Select the Configure drive units offline button, as shown in Fig. 10-2.
Fig. 10-2
The wizard will guide you when creating a new project.
4. Enter the project name and, if required, a comment (see Fig. 10-3).
10-124
Project Wizard Starter
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0