Siemens Sinumerik 802D sl Instruction Manual page 231

43400 WORKAREA_PLUS_ENABLE
– Working area limitation active in the positive direction
–
Default –
43410 WORKAREA_MINUS_ENABLE
– Working area limitation active in the negative direction
–
Default –
43420 WORKAREA_LIMIT_PLUS
mm, Axial working area limitation active in the positive direction
degrees
–
Default –
43430 WORKAREA_LIMIT_MINUS
mm, Axial working area limitation active in the negative direction
degrees
–
Default –
43500 FIXED_STOP_SWITCH
– Selection "Travel to fixed stop"
–
Default –
43510 FIXED_STOP_TORQUE
% Fixed stop clamping torque
–
Default –
Siemens Automation Parts
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
FALSE –
FALSE –
1.0e+8 –
–1.0e+8 –
0 0
5.0 0.0
Machine and Setting Data 802D
A.2
IMMED.
CTEQ BOOLEAN
– 7/7
IMMED.
CTEQ BOOLEAN
– 7/7
IMMED.
– DOUBLE
– 7/7
IMMED.
– DOUBLE
– 7/7
IMMED.
– BYTE
1 2/2
IMMED.
– DOUBLE
800.0 2/2
Setting data
A-229