Siemens Sinumerik 802D sl Instruction Manual page 255

Index
Numbers
802D machine data
802D machine data
Axis-specific, A-214
Channel-specific, A-206
Display, A-196
General, A-201
A
Access levels, 9-80
Ambient conditions, B-234
Mechanical, B-235
Analog output, Assignment, 4-31
Analog spindle, Connecting, 7-60
Assuming control priority, 10-144
Automatic configuration, 10-154
B
BERO, 7-71
Bus connector, Setting the terminator, 7-67
C
Cable clamp, 7-74
CE, Identification, B-231
Check topology, 10-161
Class of protection, B-236
CNC full keyboard (installed beneath to the PCU), Dril-
ling pattern, 5-47
CNC full keyboard (installed next to the PCU)
Dimension drawing, 5-44, 5-46
Drilling pattern, 5-45
CNC full keyboard connection, 2-15
CNC operator panel (PCU)
Dimension drawing, 5-40
Drilling pattern, 5-41
COM port connection, 7-65
Commissioning using predefined macros, 9-93
Compact flash card (CF card) slot, 2-15, 4-19
Components, 1-11
Configuring a drive unit, 10-131
Configuring SINAMICS S120, 9-93
Connect to target system, 10-140
Connected loads, 8-75
Connecting, 7-51
Bus connector, 7-67
Siemens Automation Parts
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
Connecting the digital inputs/outputs, 7-71, 7-72
to the CNC operator panel, 7-71
to the I/O module, 7-72
Connecting the Ethernet interface, 7-64
Connecting the I/O module, 7-66
Connecting the machine control, 7-73
Connecting the SINAMICS S drive, 7-70
Connection cables, 7-71
Connection for the CNC-full keyboard, 7-63
Connection overview, 7-56
Connection to PROFIBUS DP, 7-66
Control panel, 10-140, 10-143
Control powerup, 9-83
Control word CTW1, 10-146
Creating a drive project, 10-123
OFFLINE, 10-123
ONLINE, 10-150
D
Data backup, 12-187
Data organization, 11-181
Data types, L-195
Degree of protection, B-236
Description, 2-13
Description of the PP 72/48 I/O module
Interfaces, 4-33
Operator controls, 4-33
Design, Electrical, Configuring, 7-52
Detailed view, 9-105
Device configuration, 10-158
Diagnosis via STARTER, 9-111
Diagnostics function, 9-111
Function generator, 9-112
Trace, 9-115
Dielectric strength test, B-236
Digital inputs, 4-25
Assignment, 4-26, 4-30, 4-34
Description, 4-27, 4-34
Technical Specifications, 8-76
Digital inputs/outputs (CPU), 2-15
Digital outputs, 4-25
Assignment, 4-26, 4-30, 4-34
Description, 4-27, 4-34
Technical Specifications, 8-77
Dimension drawings, 5-39, 5-40, 5-42, 5-44, 5-46, 5-48
Dimensions, 8-75
Drilling patterns, 5-39, 5-41, 5-43, 5-45, 5-47
DRIVE CLiQ interface, 2-15, 4-23
Index
Index-253