Leds; Key Switch (Optional) - Siemens FT2080 Operation Manual

3.2.2
3.2.3
Building Technologies
Fire Safety
<Alarm device>
Deactivates the ↑ alarm devices in the event of alarm (password required).
Configurable standard buttons
The configurable standard buttons may be assigned with customer-specific
functions. You will find more information about configuring the standard buttons in
document '009078'.

LEDs

The LEDs on the ↑Person Machine Interface signal 'Events' and conditions. In
addition, the LEDs support the operator's orientation. The LEDs can light up in red,
yellow, or green. The LEDs can be configured according to customer-specific
requirements.
The LED colors can, for example, signal the following information:
Red
l
l
Yellow
l
l
l
Green
l
Additional information on the conditions of the LEDs (steady on, steady off or
flashing) can be found in the relevant chapter.

Key switch (optional)

You can use the key switch to release an access level. The accessible access level
is configurable.
The key switch has 2 positions:
On (horizontal position)
l
Off (vertical position)
l
Structure and function of the FT2080
Buttons, LEDs, and key switches
ALARM
Activations, e.g., ↑remote transmission, ↑alarm
devices, control function
Fault
Isolation
Deactivation, e.g. remote transmission, alarm devices,
control function
System is in operation
3
17
A6V10380629_en--_a
2015-09-10