Switching Off / On Sabotage Evaluation [De] - Siemens FT2080 Operation Manual

5 Operation
Switching off / Switching on
5.3.6
120
Building Technologies
Fire Safety
a All 'Areas' in the 'Detection tree' are displayed.
3. Press 'Lower level' in an 'Area' list entry.
a All 'Sections' in this 'Area' are displayed.
4. Press 'Lower level' in an 'Section' list entry.
a All 'Zones' in this 'Section' are displayed.
5. Highlight a 'Zone'.
a The highlighted entry is displayed with a bright background.
6. Press 'Execute commands' on the dialog window toolbar.
a The 'Select command' dialog window opens.
7. Select the 'Alarm evaluation OFF' command.
a The command execution display confirms successful execution of the
command by displaying
a Alarm evaluation is switched off.

Switching off / on sabotage evaluation [DE]

If a class 3 key safe (fire brigade key safe, 'FSD') forms part of the fire detection
installation and you want to open the housing of the control panel, you must
↑ switch off the sabotage evaluation.
NOTICE
Sabotage ALARM with police or security service
Costs due to unnecessary deployment.
● In a ↑ site switch off sabotage evaluation with 'FSD' before you open the
housing of a control panel.
.
A6V10380629_en--_a
2015-09-10