Siemens FT2080 Operation Manual page 110

5 Operation
Switching off / Switching on
110
Building Technologies
Fire Safety
Isolating a detector zone
w You are logged onto at least 'Access level' 2.1.
w The 'Zone' is switched on.
w You are in 'Main menu'.
1. Select the 'Functions' menu item.
a The 'Functions' menu is displayed.
2. Select the 'On / Off' menu item.
a The 'Functions 'On / Off'' dialog window opens.
3. Open the filter 'Element category'.
a The 'Element category' filter opens.
4. Select the filter category 'Zone'.
a The element category 'Zone' is displayed in the filter 'Element category'.
5. Press 'Set'.
a The element search starts.
a All 'Zones' are displayed in the event list.
6. Highlight a 'Zone'.
a The highlighted list entry is displayed with a bright background.
7. Press 'Execute commands' on the dialog window toolbar.
A6V10380629_en--_a
2015-09-10