Siemens FT2080 Operation Manual page 29

Duration of command
execution
Short
Long
Building Technologies
Fire Safety
Result of command
execution
OK
Not OK
Info (e.g., positive request
of counter reading)
OK
Not OK
The CEI is animated during command execution. The table below shows the static
idle state and the command execution animations.
Quiescent
condition
After a message display is closed, the CEI is reset to the idle state. Sending
multiple commands one immediately after the other can lead to multiple command
execution. Multiple command execution occurs when a long command is followed
by a short one. In the case of multiple command execution, negative intermediate
results are represented by
Structure and function of the FT2080
Symbol displayed
During command execution
Individual Multiple command
command with positive
intermediate result
and positive intermediate results by
Touch screen
Duration of result display
5 seconds
Closed with message display
dialog window.
Closed with message display
dialog window.
Closed with message display
dialog window.
Closed with message display
dialog window.
Multiple command
with negative
intermediate result
on the CEI.
A6V10380629_en--_a
2015-09-10
3
29