4.2 Display
4.3 Key switch
4.4 LEDs
Building Technologies
Fire Safety
The display has two areas:
ABCDE FGHI
1
ABCD: 3
ABCD: 421
ABCDEFGHI AAA/BBB
2
ABCD: 026
ABCDE CCC
Display representation with two indicated messages
1
Header
You can use the 'Key switch' to release the operation.
The 'Key switch' has two positions:
ON (horizontal position)
OFF (vertical position)
The LEDs on the Person Machine Interface signal 'Events' and conditions. In
addition, the LEDs support the operator's orientation.
In general, the colors of the LEDs signal the following information:
Red
Yellow / green
Additional information on the conditions of the LEDs (steady on, steady off or
flashing) can be found in the relevant chapter.
ABC: 32
ABC: 75
2
Representation area
'ALARM'
Activation of the remote transmission
'Fault'
Status confirmation
Configured event categories
PMI
4
Display
07:55:31
XXX YYY ZZZ
XXX YYY ZZZ
17
009310_i_en_--
2013-11-14