Response Is Available (Response Code Is Other Than "00") - Omron V700-HMD13 series User Manual

Section 7
Troubleshooting

7.2.2 Response is available (response code is other than "00")

According to the response code in response data, check the following points.
Error in communication with upstream controller side
Response code
"14"
"18"
Communications error with IDRW head
Response code
"10"
"11"
"12"
"93"
"9A"
Communications error with IDRW head
Response code
"70"
"71"
"72"
"7A"
"7B"
"7E"
"7F"
System error with IDRW head
Response code
"7C"
V700-L11
58
User's Manual
Name
Format error • Command format (type and number of characters, number of pages, etc.)
Frame length error
Name
Parity error • Routing of IDRW head cable (adverse effect by external noise interference)
• Noise environment on power line of link unit
Framing error
Overrun error
IDRWH communication error
IDRWH fault • IDRW head not connected.
• Wrong connection of IDRW head extension cable (CS signal 0V, 5 V)
Name
Communications error • Mounting distance between ID tag and IDRW head(s)
• Noise environment around IDRW head cable (correct the location of head)
• Spacing to another IDRW head
Verify error • Life of ID tag in terms of number of rewrite operations (100,000 cycles)
ID tag missing error • Mounting distance between ID tag and IDRW head(s)
• Spacing to another IDRW head
Address designation error • Wrong page, or address/number of bytes with executed command
Out of write area error • Mounting distance between ID tag and IDRW head(s)
ID system error (1) • Operating environment of tag (damaged ID tag by misoperation or misuse)
• Model and specifications of ID tag used
ID system error (2)
Name
IDRW head fault (The equipment may have been damaged.)
Typical checkpoint
Typical checkpoint
Typical checkpoint
Typical checkpoint