System Features - Omron V700-HMD13 series User Manual

Section 1
System Features and Configuration

1.1 System features

OMRON's RFID system for semiconductor device fabrication line is configured with the following units:
Model V700-HMD13 , or V700-HMD11-1 (ID R/W head)
An ID R/W head that reads or writes data from or into the memory on ID tag without a need to contact
the ID tag. It will be hereunder simply called IDRW head (or, more simply, IDRWH). It is operated inde-
pendently or via a link unit.
Two differently formed IDRW head types are available:
Model V700-HMD13
position" per SEMI standards.
Model V700-HMD11-1 features a form and data transaction performance suitable for the "docked
position" per SEMI standards. It is delivered together with two mounting nuts.
Model V700-L11 (ID link unit)
This unit allows one or more ID R/W heads to be linked to one port of an upstream controller, and will
be hereunder simply called "link unit". Being driven by a 24 VDC power supply, it supplies 5 VDC
power to the IDWR heads. When delivered, it includes a connector (COMBICON screw-down plug:
Model XW4B-05C1-H1-D) for multi-connection ports.
RUN COMM
Model V700-D23P41-1 (ID tag)
This is a round rod type ID tag that measures 3.9 mm in diameter and 25 mm in length. It contains a
memory space of 240 bytes that allows a user to read or write data from or into it.
V700-L11
8
User's Manual
features a form and data transaction performance suitable for the "undocked
ID ERR
Mounting nut (2 M4)
Connector for multi-connection port