Table of Contents
Advertisement
4.13 Track switch, manual
The rail switch is manually operated and is installed with a standard ceiling bracket.
The rail switch is used in combination with a ceiling installed single rail system with
S-profile, where a change in direction is required during movement of the patient.
This is installed as described in section 5.8.
Track switches are supplied in white or grey.
4.14 Transit coupling
The transit coupling is operated electrically and mounted with pendles in the
ceiling on both sides of the wall; it has a standard length of 800 mm.
The coupling is used for movement of a patient from one room to another.
The coupling can be used in traverse systems with S-, M,- and L-rails, and in a
mono-rail system with only S-profile rails.
The installation of the coupling is described in the Installation manual
section 5.9.
Control button (for the wall), and a transformer is enclosed, when delivered.
The coupling is available in white or grey.
Coupling lock fixture for rail profile S, to be mounted on the
traverse profile in the end that is coupled.
It is mounted to ensure that the traverse rail and coupling are locked
and connected correctly before room transfer can be done.
Installed as described in the Installation manual section 5.9.
Available in white or grey.
Coupling lock fixtures for traverse profile M/L.
To be mounted on the traverse profile in the end that is coupled,
it is mounted to ensure that the traverse rail and coupling are locked
and connected correctly before room transfer can be carried out.
Installed as described in section 5.9 Installation instructions.
Available in white or grey.
Coupling positioning fixtures for parallel rail S-profile
To be mounted on the parallel rail, close to the coupling, to position
the traverse rail correctly in proportion to the coupling.
Installed as described in section 5.9 Installation instructions.
Available in white or grey.
Coupling positioning fixtures for parallel rail M/L-profile
To be mounted on the parallel rail, close to the coupling, to position the
traverse rail correctly in proportion to the coupling.
Installed as described in section 5.9 Installation instructions.
Available in white or grey.
14
Advertisement
Table of Contents
