Table of Contents
Advertisement
1) The feet are mounted onto
the adjustable legs by means
of the Allen key located on
top of the leg.
Remember to re-tighten
both screws.
1)
38
2) The top rail is installed by
hitching the on the rail
onto the top of the legs.
2)
4) The charger is installed onto the
pre-drilled holes in the legs.
Use the 5 pcs. M3X5 screws that
came with the Gantry.
.
4)
3) Tighten the pre-installed screw
which is located in the top
of the leg with the Allen key.
Put back the Allen key in the
holder after use.
3)
5) Adjustment of the height.
Up: Lift the upper part of the
leg to the desired height.
Down: Lift the upper part of
the leg slightly, pull the handle,
lower leg upper part to the
desired height and release the
handle.
5)
6) Install Robin into the Trolley as
described in the users manual.
6)
Advertisement
Table of Contents
