Table of Contents
Advertisement
The traverse rail is under-hung
When the parallel rails are mounted and the traverse trolleys and end stop is positioned and secured, install quick
traverse brackets underneath the traverse trolley, as shown on the drawing.
Regardless whether the two traverse trolleys are facing opposite each other or the same way, it is important that
the two quick traverse brackets face the same way, or else there will be problems when mounting the rail.
When the traverse rail is correctly placed lengthwise and secured in the quick traverse bracket with the
Allen-screw, the rail is locked using a lathe centre screw, which is screwed into the quick traverse bracket from
above until it has been screwed all the way down.
The traverse rail is partly between-hung
When the traverse rail is partly between-hung, the same mounting principle is used as with under-hung traverse
rail. Here, the rail will be cut upon delivery, so that the quick traverse bracket may be mounted to the rail's middle
suspension point.
Remember before mounting the traverse rail to determine whether it should be possible to mount the hoist
trolley later or not.
30
Advertisement
Table of Contents
