Installing hardware expansions
5.3 Disk drives
5.3.4
Removing and installing internal hard disks
Requirement
● The device is disconnected from the mains.
● The device is opened.
● The drive bay is taken out of the chassis.
Procedure for removing the hard disk drive
Loosen the four screws
Procedure for installing the hard disk drive
Place the drive onto the drive bay plate and secure the drive with four screws
48
①
on the drive bay plate and remove the drive from the drive bay.
Operating Instructions, 09/2018, A5E41134132-AE
①
.
SIMATIC IPC347E