Technical Specifications; Certificates And Approvals - Siemens SIMATIC IPC347E Operating Instructions Manual

Technical specifications

7.1

Certificates and approvals

Note
Applicability
The following shows the approvals that may be available. For the device itself, it is
certificated as shown on the product label and package label.
ISO 9001 certificate
The Siemens quality management system for our entire product creation process
(development, production and sales) meets the requirements of ISO 9001:2008.This has
been certified by DQS (the German society for the certification of quality management
systems). Certificate No.: 01 100 1430201
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
CE marking
2004/108/EC Directive of the European Parliament and of the Council of 15 December 2004
on the approximation of the laws of the Member States relating to electromagnetic
compatibility (until 19.04.2016)
2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to electromagnetic compatibility;
Official Journal of the EU L96, 29/03/2014, p. 79–106 (from 20.04.2016)
Low Voltage Directive:
2006/95/EC Directive of the European Parliament and of the Council of 12 December 2006
on the harmonisation of the laws of Member States relating to electrical equipment designed
for use within certain voltage limits (until 19.04.2016)
SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE
7
69