Disk Drives; Installation Options For Drives; Removing The Drive Module - Siemens SIMATIC IPC347E Operating Instructions Manual

Table of Contents

Advertisement

5.3

Disk drives

5.3.1

Installation options for drives

The drive modules are horizontal slot. DVD-ROMs, DVD burners and HDDs (with a 5.25 to
3.5 inch converter) may be installed in the slots.
5.3.2

Removing the drive module

Requirement
● The device is disconnected from the mains.
● PH2 screwdriver
Procedure
1. Unlock the front door and open the right-front door.
2. Remove the top cover.
3. Disconnect the power supply and data cables.
SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE
Installing hardware expansions
5.3 Disk drives
45

Advertisement

Table of Contents
loading

Table of Contents