Save And Exit - Siemens SIMATIC IPC347E Operating Instructions Manual

B.7

Save and Exit

Save and exit
Select Save & Exit from the BIOS setup page to enter the save and exit page. The save and
exit page is shown as below.
Save changes and reset
When you completed the system configuration changes, save the changes with the following
instructions.
1. Select Save Changes and Reset with the arrow keys and press Enter key.
2. Select Yes and press Enter key to save changes and reset. Or Select No to quit the save.
After the system is rebooted, the new system configurations take effect.
Discard changes and reset
You can reboot the system without saving the changes with the following instructions.
1. Select Discard Changes and Reset with the arrow keys and press Enter key.
2. Select Yes and press Enter key to discard changes and reset. Or Select No to quit.
Restore defaults
You can restore the system with the following instructions.
1. Select Restore Defaults with the arrow keys and press Enter key.
2. Select Yes and press Enter key to the load optimized defaults. Or Select No to quit.
SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE
Appendix BIOS
B.7 Save and Exit
119