Preface - Siemens SIMATIC IPC347E Operating Instructions Manual

Preface

Purpose of the Operating Instructions
This operating instruction contains all the information you need for commissioning and
operating SIMATIC IPC347E.
This operating instruction is intended for the following personnel:
● programming and testing personnel who commission the device and connect it with the
peripheral equipment.
● service and maintenance personnel who install add-ons or carry out fault/error analyses.
Validity of the Operating Instructions
These operating instructions are valid for all supplied versions of the SIMATIC IPC347E.
The updates of the document will be published on the Siemens technical support
(https://support.industry.siemens.com).
Conventions
The terms "PC" or "device" are sometimes used in place of the product name SIMATIC
IPC347E in these operating instructions.
Basic knowledge required
Knowledge of personal computers and Microsoft operating systems is required.
General knowledge of automation control engineering is recommended.
Position in the information landscape
The documentation for the SIMATIC IPC347E includes the following sections:
● SIMATIC IPC347E, Quick Install Guide
● SIMATIC IPC347E, Important Notes Product Information
● SIMATIC IPC347E, Operating Instructions
The Quick Install Guide and the "Documentation and Drivers" DVD are in the accessory box
supplied with the product. The Operating Instructions is part of the "Documentation and
Drivers" DVD.
For further instructions on how to handle the software, refer to the corresponding
documentation.
SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE
3