Table of Contents
Advertisement
Expansions and configuration
10.4 Installing disk drives
Disk drive or removable disk rack installation
Steps for installing a disk drive in a horizontal drive carrier
1
2
3
4
5
10.4.3
Installing and removing a hard disk
Preparation
1. Unplug the device from mains and disconnect all cables.
2. Open the device.
Installing a disk drive
Steps for installing a disk drive
1
2
10-8
Slide the disk drive into the carrier from
the front.
Remove any vertical drive carrier The
only way to get at the mounting screws
on the right side of the drive is through
the openings of the vertical carrier.
Mount the disk drive into the drive
carrier using four screws.
Insert the drive carrier module again.
Connect the power and data cables to
the disk drive.
Connect the power and data cables
to the disk drive.
Hold the drive on the drive carrier
plate and secure it with 4 screws
(1).
Operating Instructions, Edition 09/2005, A5E00432875-01
SIMATIC Rack PC IL 43
Advertisement
Table of Contents
