Installing Windows; Installation Of Windows 7 - Siemens SIMATIC IPC347E Operating Instructions Manual

Device maintenance
6.5 Installing the software
6.5.3

Installing Windows

6.5.3.1

Installation of Windows 7

Requirement
You need the Recovery DVD for the operating system you want to install. It is included in the
product package.
Procedure
1. Insert the Recovery DVD into the DVD drive.
2. Restart the device with the on/off button.
3. Press the <F10> key and select the boot device from DVD.
After initialization, a boot menu is displayed.
4. In the boot menu, select the optical drive using the cursor keys. It is identified by a "P" in
front of the SATA port number.
Example:
P3 - OPTIARC DVD-ROM DDU1681S
5. Confirm the selection by pressing ENTER.
6. Immediately press any key when you see the following prompt to install the operating
system from the Recovery DVD.
Press any key to boot from CD or DVD ..
After a few seconds, you will see the "Install Windows" installation program. For setting
the boot sequence, refer to Boot Setup (Page 115).
7. Now follow the instructions in the installation program. You can find additional information
on this in the section: "Install Windows" installation program.
64
Operating Instructions, 09/2018, A5E41134132-AE
SIMATIC IPC347E