Powering Up And Shutting Down The Control - HEIDENHAIN iTNC 530 HSCI Technical Manual

Hide thumbs Also See for iTNC 530 HSCI:

Table of Contents

8.1.17 Powering up and shutting down the control

Powering up the

While the control is starting, a customer-specific company logo can be

displayed instead of the HEIDENHAIN logo. If a service pack is installed, then

a different logo may appear instead of the message window.

Requirements of the logo:

The logo must be a bitmap file (*.BMP) with a color resolution of 16 or 24

bits. It is displayed in 16 bits.

Maximum picture size:

• BF 250: 1024 x 768

• BF 260: 1280 x 1024

If the picture is larger than the window, it will be cropped symmetrically. If

the picture is smaller than the window, it will be displayed centered.

The logo must be designed to remain recognizable even with a reduced

While the control is powering up, the complete logo is displayed. If power

is interrupted, only a reduced window remains available:

• BF 250: 1020 x 681

• BF 260: 1142 x 848

HEIDENHAIN Technical Manual iTNC 530 HSCI