Table of Contents
Advertisement
8.1.31 BUS diagnosis
1320
The control features functions for diagnosis of the HSCI or PROFIBUS system.
You can access the functions as follows:
Switch to the Programming mode of operation
Press the MOD key
Press the DIAGNOSIS soft key
Press the BUS DIAGNOSIS soft key.
Example screen:
In Diagnosis mode, the structure of the HSCI/PROFIBUS system as well as
the details of the HSCI/PROFIBUS components can be displayed.
The HSCI and PROFIBUS tabs above the left window are only shown if both bus
systems are connected to the control. In this case you can switch between
the bus systems by pressing the HSCI and PROFIBUS soft keys.
HEIDENHAIN Technical Manual iTNC 530 HSCI
Advertisement
Table of Contents
