Selecting The Plc Mode; Plc Main Menu - HEIDENHAIN iTNC 530 HSCI Technical Manual

9.1.1 Selecting the PLC mode

9.1.2 PLC main menu

July 2013
To select the PLC mode:
Select the Programming and Editing operating mode.

Press the MOD key.

Enter the code number 807667 and confirm your entry with the ENT key, or

if you already entered the code number, press the PLC EDIT soft key.
Exit PLC mode:
Press the END soft key or the END key.

After you have entered the code number (or pressed the PLC EDIT soft key)
the iTNC displays the PLC main menu:
9.1 PLC Functions
1667