Explanation of Window
1.7
Explanation of Window
The following describes FR Configurator window.
1.7.1
Main frame
The Main frame (main window) of FR Configurator consists of 3 areas.
• Navigation area (Refer to page 34)
An area for showing information of the registered inverter, or for making settings. "Test Operation", "System Settings",
"Setting Wizard", and "Troubleshooting" are available in this area.
• Monitor area (Refer to page 36)
An area for showing obtained monitor data of inverter. "Graph", "I/O Terminal Monitor", "Machine Analyzer", "Batch Monitor"
are available in this area.
• System area (Refer to page 35)
An area for showing and read/write parameters, or for converting from parameter setting of conventional model. "Parameter
List", "Diagnosis" and "Convert" are available in this area.
B
C
Navigation area
• Explanation of Main frame
No.
Name
A
Title bar
B
Menu bar
C
Tool bar
D
Status bar
E
Split line
F
Conceal button
G
Minimize button
H
Maximize button
I
Close button
32
A
D
"FR Configurator SW3" is displayed on the title bar. If a system file has been read, or has
been saved, the file name and file location is displayed.
Each functions are available by selecting from the menu.
Each functions are available by clicking icons of the tool bar.
A model name, Operating status, etc. are shown.
Adjustment of System area size and Monitor area size is available.
Conceals the Monitor area and System area.
Minimizes the Main frame window size of FR Configurator.
Maximizes the Main frame window size of FR Configurator.
Closes FR Configurator.
Function and description
G
H
I
F
Monitor area
E
F
System area
Refer
to
Page
—
37
37
39
—
—
—
—
—