Example Of Converting - Mitsubishi FR-A700 Series Instruction Manual

4.7.3

Example of converting

(1) When selecting an inverter from a model list
1) Click
"Convert Method".
2) Choose "Select an Inverter from a Model List". Click
after selecting.
3) Set the infomation of the source inverter in "Model
Setting". Fill in the each items of the source inverter.
Click after setting.
4) A parameter requiring caution is displayed in a list.
Parameter in the list is converted with an initial value.
Click after confirmed.
(If a setting of parameter in the list is required, uncheck
"Use Initial Value for all parameter", and change the
required parameter setting.)
5) Select the target inverter on the "Target Inverter"
window, and the convert setting is finished. Click
.
6) The value of some of the source parameter is available
for changing. When changing the parameter setting
value, enter a changed value in Setting field.
When the convert setting is finished,
"Convert" window becomes available. Click
to display "Convert Confirmation".
in "Convert" window to display
Convert (System area)
Select the target
inverter
Click to display "Convert Confirmation"
in
[Select an Inverter
from a Model List]
Set the information of
the source inverter
107
4