System View (Navigation area)
4.5.2
Setting Wizard
Setting Wizard is a function to make parameter setting without regard to parameter number. Double-click a desired function in
the "Setting Wizard" (or select the function and click
Click
in System View or select [Setting Wizard] sub-menu under [Navigation] of [View] menu to display "Setting
Wizard".
No.
Name
A
Inverter type information
B
Setting Wizard item
C
Execute
96
A
B
Shows station number, inverter type, capacity and comment of the selected inverter.
Shows Setting Wizard items. Select a desired function (Up-key and Down-key is also available) and
double-click (or click
(If Model Setting has not made yet, color turns gray and unavailable to select.)
Click to start the Setting Wizard of the selected function. (Refer to page 56)
(If Model Setting has not made yet, color turns gray and unavailable to select.)
) to start the Setting Wizard of the selected function.
Function and description
) to start the Setting Wizard of the selected function (Refer to page 56).
C