Indication Of Inverter Frequency And Fault; Indication Of Operation Mode And Switching - Mitsubishi FR-A700 Series Instruction Manual

4.4.2

Indication of inverter frequency and fault

Shows output frequency or fault indication etc. of the selected inverter. If model setting of the selected station has been made
and set to ONLINE, the indicator shows output frequency. During OFFLINE, or if model setting of the selected station has not
been made, indicator turns to blank. If unit of frequency (speed, machine speed) has been changed by parameter setting,
output frequency of selected station is indicated along with the change of the unit.
JOG, PS, PU STOP, Pr. CL, PCPY, Warning and Alarm are not displayed.
Output frequency display
Graph sampling
4.4.3

Indication of operation mode and switching

Click ,
Operation mode of the selected inverter is shown at the operation mode indicating part.
Switchs to External
Switchs to PU
operation mode
operation mode
REMARKS
•
Depending on the current operation mode or parameter setting, some operation mode are unavailable for change. For
example, at the initial state, switching between PU operation mode and network operation mode is unavailable. (Refer to page
24 or the inverter manual for details.)
At fault occurrence (OC1)
OFFLINE
, to switch the operation mode.
Switchs to
Network operation
Test Operation (Navigation area)
At communication error occurrence
Operation mode indication
Indication of External/PU
combined operation mode
4
91