Overview of Setting Wizard
3.1.3
Parameter List
Click
after the required item in each setting is filled in, and then the parameter setting is configured based on the
inputted setting. Configured parameter setting is displayed in Parameter List after every setting is finished.
To write the parameter setting to the inverter, write from the Parameter List in the Main frame. (Refer to page 97)
A
B
No.
Name
A
Selected station number
B
Setting procedure
C
Parameter setting field
D
Help
E
Cancel
F
<Back
G
Finish
58
D
Shows the selected station number, inverter type and a comment.
Shows the past settings in Setting Wizard.
Shows the parameter setting configured in Setting Wizard in the list.
Displays Help window. (Refer to page 147)
Closes the window with the setting made invalid.
Returns to the previous setting window.
Closes Setting Wizard with the setting made valid.
Configured setting by Setting Wizard is reflected into Parameter List.
(Parameter writing to the inverter is not performed.)
E
F
G
Function and description
C