Explanation Of Window - Mitsubishi FR-A700 Series Instruction Manual

4.9.2

Explanation of window

A
E
F
G
H
I
No. Name
A Start
B Stop
C Clear
D Trigger/Sampling
E
CH
Sampling item setting section
F
(Trigger/sampling setting section)
G
Graph area
Scale changing section
H (Cursor function section, History
display section)
I
Scale
J
Cursor
K History
L Graph (digital data)
M Graph (analog data)
N
Trigger Line
Note
Each graph displays their own CH number. Though when a graph data is out from Graph area, CH number may not be
displayed. Adjust with 0 position adjust and scale changing to make a data visible inside of Graph area.
B C D
J K
Starts sampling.
Stops sampling.
Clears the graph. If a graph has not been displayed yet, the setting of sampling item is
cleared.
Click
Click
Click tabs to switch displaying Sampling item setting section (Refer to page 126) and Trigger/
sampling setting section (Refer to page 128).
Shows sampling data in graph form.
Click tabs to switch displaying Scale changing section (Refer to page 132), Cursor function
section (Refer to page 133) and History display section (Refer to page 134).
Click to display Scale changing section. (Refer to page 132)
Click to display Cursor function section. (Refer to page 133)
Click to display History display section. (Refer to page 134)
Digital data drawn in graph form (CH5 to CH8). OFF is drawn on a grid line, and ON is
drawn between the grid lines.
Analog data drawn in graph form (CH1 to CH4). Graph is drawn based on the setting of
Vertical Axis scale and 0 position adjust. Vertical Axis scale of each data (CH) can be
changed separately.
Shows a position of trigger start. "T" is displayed on top of Trigger Line.
Graph (Monitor area)
N
Function and description
to display trigger/sampling setting section. (Refer to page 128)
to display sampling item setting section. (Refer to page 126)
L
M
4
125