Explanation Of Functions; Torque Boost; Upper Limit Frequency; Lower Limit Frequency - Mitsubishi FREQROL-U100 Instruction Manual

• Upper limit frequency
rn •
Lower limit frequency
rn
The upper and lower limit clamps of the output frequency can be set.
• Explanation of functions
• Torque boost (manual) [[]
The Jaw frequency band motor torque can be adjusted to the load.
-25-
l O O % ~ ' ~
..•..•
:~it
frequency setting range
Output :
frequency ,
.•.••. : Lo1wer limit frequency setting range
o - ,
Frequency 5V
setting signal
[Factory setting)
Torque boost (manual)
6 %
(Note)
If the setting value is too large. the overcurrent protective
function may activate. The setting value can be adjusted
while confirming the motor current with the monitor function.
[Factory setting)
• Upper limit
frequency"""120Hz
• Lower limit
frecuencv-. ...
0 Hz
O~::~~-·----·---··-1
""""?T
Settingr . [
range :
Output Base
frequency (Hz) frbQuency