Servo Amplifier Standard Specifications - Mitsubishi Electric MELSERVO-J3W Series Instruction Manual

1. FUNCTIONS AND CONFIGURATION
Note 1. MR-J3W-22B dose not have a cooling fan.
2. For 1-phase 200 to 230VAC, connect the power supply to L
specification.

1.3 Servo amplifier standard specifications

Servo amplifier
Item
Rated output capacity
Rated voltage
Rated current
Voltage, frequency
Rated current
Permissible voltage fluctuation
Permissible frequency fluctuation
Power supply capacity
Inrush current
Voltage, frequency
Rated current
Permissible voltage
fluctuation
Control circuit
Permissible
power supply
frequency fluctuation
Power
consumption
Inrush current
Voltage
Interface power
Power supply
supply
capacity
MR-J3W- 22B
A-axis
200W
[A] 1.5
3-phase or 1-phase 200 to 230VAC, 50/60Hz
[A] 3.5
3-phase or 1-phase 200 to 230VAC:
[A]
[W]
[A]
, L and leave L
1 2
44B
B-axis A-axis B-axis
200W 400W 400W
3-phase 170VAC
1.5 2.8 2.8
6.1
170 to 253VAC
Within 5
Refer to section 10.2
Refer to section 10.5
1-phase 200 to 230VAC, 50/60Hz
1-phase 170 to 253VAC
Within 5
Refer to section 10.5
24VDC 10
(Note 1) 0.25
1 - 3
open. Refer to section 1.3 for the power supply
3
77B
A-axis B-axis
750W 750W
5.8 5.8
3-phase 200 to 230VAC, 50/60Hz
10.4
3-phase 170 to 253VAC
0.4
55
1010B
A-axis B-axis
1kW 1kW
6.0 6.0
13.9