Connecting The Scanner To Your Pc - Denso HC36IITK-A Operation Manual

4. CONNECTING THE SCANNER TO YOUR PC

Connection
(1) Turn off the PC.
(2) Plug the connector(s) straight into the PC (and the keyboard or
numeric keypad). Be careful with the connector orientation.
(3) Turn on the PC.
(4) Set parameters by using the bar-coded parameter menu given in
Chapter 6 according to your needs.
NOTE: Connecting the scanner to some PCs may disable their
integrated keyboards. If it happens, use an add-on keyboard via the
Y-type cable. And be sure to set the connection type to "With
keyboard" in the bar-coded parameter menu given in Section 6.2.
NOTE: For a PC having a connector to be shared by keyboard
and mouse, a keyboard/mouse branch adapter made by the PC
manufacturer may be required. Check the add-on keyboard
connection provided in your PC.
Disconnection
(1) Turn off the PC.
(2) Pull out the connector straight from the PC (and the keyboard or
numeric keypad).
NOTE: When connecting or disconnecting cable connectors, hold
the connector housings not the cables. Pulling cables may result in
wire breaks or contact failure.
NOTE: When using a Y-type cable, do not pull the branch section
strongly.
4