Setting The Minimum/Maximum Numbers Of Digits Readable - Denso HC36IITK-A Operation Manual

6.7 Setting the Minimum/Maximum Numbers of
Digits Readable
You may set the minimum and maximum numbers of digits readable
for individual bar code types.
Setting Procedure
(1) Scan the "Set min. number of digits" (or "Set max. number of
digits") for the target bar code type.
(2) Enter the minimum number of digits in the order of the upper and
lower digits by using the "Bar-coded values for decimal entry"
given on page 36.
If the number of digits is in a single digit (any of 1 to 9), then scan
"0" for the upper digit.
Canceling Procedure
(1) Scan the "Set min. number of digits" (or "Set max. number of
digits") for the target bar code type.
(2) Enter 00 by scanning "0" twice on the "Bar-coded values for
decimal entry."
NOTE: If you scan "All defaults," the minimum and maximum
numbers of digits readable for all bar code types will be canceled.
(Example) Setting the minimum number of digits readable for Code
39 to 6:
Set min. number of digits
(for Code 39)
0
34
6