Denso HC36IITK-A Operation Manual page 18

Number of Digits
The number of digits of bar code data will be displayed in two digits
on the PC screen.
NOTE: The number of digits will be omitted for UPC and EAN
codes.
Example: If the following bar code (Codabar) is scanned, it will be
displayed on the PC screen as listed below according to the conditions.
A123456A
If the code mark and
number of digits are set
to:
Enable
Enable
Disable (default)
Disable (default)
(Note) When the code mark is set to follow bar code data.
If Codabar start/stop codes
are set to:
(see page 21)
Transmit a/b/c/d
Disable (default)
Transmit a/b/c/d
Disable (default)
15
The PC screen
shows:
(Note)
N08a123456a
N06123456
a123456a
123456