Applicable Devices And Device Configuration; Applicable Devices - Omron CJ Series Connection Manual

5. Applicable Devices and Device Configuration

5.1. Applicable Devices

The applicable devices are as follows:
Manufacturer
OMRON CJ2 CPU Unit
OMRON EtherNet/IP Unit
OMRON NX-series
EtherNet/IP
OMRON NX-series Units
DC Input Unit
AC Input Unit
Relay Output Unit
Transistor Output Unit
Digital Mixed I/O Unit
Analog Input Unit
Analog Output Unit
Temperature Input Unit
Heater Burnout Detect Unit
Communications Interface Unit
System Unit
Load Cell Input Unit
Incremental Encoder Input Unit
SSI Input Unit
Pulse Output Unit
Safety CPU Unit
Safety Input Unit
Safety Output Unit
Precautions for Correct Use
In this document, the devices with models and versions listed in 5.2. Device Configuration are
used as examples of applicable devices to describe the procedures for connecting the
devices and checking their connections.
You cannot use devices with versions lower than the versions listed in 5.2.
To use the above devices with models not listed in 5.2. or versions higher than those listed in
5.2., check the differences in the specifications by referring to the manuals before operating
the devices.
Additional Information
This document describes the procedures for establishing the network connections.
It does not provide information on operation, installation, wiring method, device functionality,
or device operation, which is not related to the connection procedures.
Refer to the manuals or contact your OMRON representative.
5．Applicable Devices and Device Configuration
Name
TM
Coupler Unit
Model
CJ2[]-CPU[][]
CJ1W-EIP21
CJ2H-CPU6[]-EIP
CJ2M-CPU3[]
NX-EIC[][][]
NX-ID[][][][]
NX-IA[][][][]
NX-OC[][][][]
NX-OD[][][][]
NX-MD[][][][]
NX-AD[][][][]
NX-DA[][][][]
NX-TS[][][][]
NX-HB[][][][]
NX-CIF[][][]
NX-PC0[][][]
NX-RS[][][][]
NX-EC0[][][]
NX-ECS[][][]
NX-PG0[][][]
NX-SL[][][][]
NX-SI[][][][]
NX-SO[][][][]
5